Best Gun Cleaning Rods
One of the main reasons why most people claim about the gun cleaning kits they buy is poor gun cleaning rods. The choice of the cleaning rod is an important consideration when you not only want to have good cleaning experience but also when you need to have stellar results when you disassemble your gun to service it. Ideally, you should always strive to use the best gun cleaning rod at all times.
It is normally frustrating to find that the rod or rods you have are unable to get the job done, but since these are inexpensive components in the cleaning kit, you can always replace them. However, you must first know how to choose the right ones, as well as some of the most recommended rods by the pros.
It is appalling that the bulk of the rods in the gun cleaning kits available in the market today are not of good standards. Some are too short or too long for the guns they were purchased for, while others are prone to bending or breaking, and as such, you can only use them for a limited number of times.
If you are a proud owner of a gun, and you have a cleaning kit, but you are not pleased with the kinds of rods you have, then read keenly because we will share with you not just how to find the best rifle cleaning rods in the market, but also give you recommendations on some of the rods you can trust to give you great results.
Best Gun Cleaning Rod Reviews
Tipton 1 – Piece Deluxe Cleaning Rods
The Tipton 1 – piece deluxe cleaning rods were designed for the US Military armorers who needed a versatile cleaning rod that could be used on service rifles under very demanding conditions. With these rods, cleaning guns at extreme temperatures is no longer a problem, and you don’t have to worry about the rod not regaining its original straightness after use.
The rods are made of carbon fiber, and they are “deluxe” due to their agronomical design that allows their handles to spin on two sets of ball bearings. With such a design, a smooth pulling and pushing motion is created and this makes it a breeze to clean the rifles. They also feature a shank-through construction that makes it possible to have reasonable hammer blows at the end of the rod to get a tight patch.
- Ergonomically designed handles for easy operation
- Made of carbon fiber, hence, strong and durable
- Ideal for use in extreme temperature conditions
- Has ball bearings
- Available in a variety of sizes for different gun users
- Incorrect sizing. Doesn’t correspond to the product predictions.
- Inconsistent thread counts
- Some customers noted that they snapped in half with the first use
- Some rods split
Dewey 1 – Piece Cleaning Rod
The Dewey 1 – Piece Cleaning Rod will work for you whether you need to work on your rifles or shotguns. They are special length coated rods that come with 8 x 36 male threads which makes it possible for them to be used with accessories by other manufacturers without the need of special adaptors.
Every rod comes with a plastic ball bearing handle as well as a universal slotted tip. The lengths of the rods are equivalent to the lengths of the Higher Power Service Rifles. If you desire to get the best cleaning results with for your shotguns, then you have every reason to consider the Dewey 1 – piece shotgun cleaning rod.
- Ideal for cleaning long rifles and shotguns
- Made of high quality steel
- Has ball bearings on the handle
- Easy to use
- Some may come without plastic storage tubes
- Some customers complained of some breaking with the first use
- Some may be misaligned and off center
- The nylon coating gets eroded when cleaning with the road.
Gunslick 35002 Gsl 1 Pcs Fib CL Rod
Gun Slick is not a new name when it comes to manufacturing gun cleaning accessories, and their Gunslick 352002 is one of the best pistol cleaning rod you will in the market today for guns in its caliber. It is ideal for cleaning .22 Cal and larger pistols, and it boasts of the highest quality materials. Its total length is about 8”, and though it is most suited for the larger pistols, you will also get very good results with it when you need to clean handguns.
Its soft, easy grip handles fitted with a ball bearing will give you the grip you need and also allow you to exert the pressure you need to thoroughly clean the inside of the barrels. Should you decide to apply force and use some rigorous cleaning movements, you will be pleased to note that the rod will remain straight throughout the cleaning process. It is also worth noting that the rod is very tough on fouling and this is some of the other attributes that make it one of the best pistol gun cleaning rods you will find in the market today.
- Made of highest quality materials
- Ideal of handguns
- Has a soft, easy-grip handle
- It is tough on fouling
- Not suitable for rifles
- Some customers reported early failures with the gun
Gunslick 32011 Gsl 1 Pcs Fib CL Rod
Here comes another rod by Gunslick that makes it to the list of the best gun cleaning rods. The Gunslick 32011 Fib CL Rod is a one-piece, 36- inch rod made of the highest quality materials. Its construction is extremely strong, thus allowing you with the versatility to exert pressure during the cleaning process for better results.
Unlike most of the rods you will find the market today, the design of the rod eliminates particle pickup and the inclusion of ball bearing in the handles helps to facilitate a smooth rotation and function during use. It may not be the sexiest cleaning rod you will find in the market, but with up to four convenient caliber ranges, you will have a lot of versatility in using this rod.
- Made of highest quality materials
- Fitted with ball bearings for smooth rotation
- Eliminates particle drops
- Has four caliber ranges
- Some rods don’t fit correctly in .22 barrels
Pro Shot .22 – .45 Caliber Universal Pistol
If you own a pistol, and you need a universal one-piece cleaning rod for your gun, then you have every reason to consider the Pro Shot .22 – .45 Caliber Universal Pistol cleaning rod. It is a 6.5-inch rod with stationary handles and made from stainless micro-polished steel. It comes with a brass patch holder for the .22 – .42 Cal and using it is quite intuitive. With its small size, it won’t take a lot of storage space in your kit.
- A universal pistol cleaning rod
- Requires small storage
- Doesn’t have ball bearings on the handle
- Ideal only for cleaning pistols
Pro Shot Premium 1 – Piece Micro-Polished Cleaning Rod
The Pro Shot Premium 1 – Piece Micro-Polished Cleaning Rod boats of strength and accuracy when it comes to taking good care of your gun. It features a tough and dense shiny finish that will not pick up and carry abrasive grit or dirt to the bore during the cleaning process. As such, it is one of the best types of rods for gun cleaning currently.
- Made of high quality micro polished stainless steel
- Doesn’t pick up or carry abrasive grit
- Has rugged precision threading for more rod tip accessories
- False advertising. Advertised as two, yet comes as one
Tipton Max Force Cleaning Rod .22 – .42 Caliber
If you are tired of breaking or bending small diameter cleaning rods, then you will find a better alternative in Tipton Max Force Cleaning Rod .22 – .42 Caliber cleaning rod. It is not only made of the highest quality materials, but also the design of its handle allows for quick and easy positioning of the thumb to apply gentle pressure for effective results. Its lightweight has an ergonomic design and highly durable.
- Ergonomic handle design
- Made of high quality material
- Has 40” usable length
- Ideal for pistol cleaning
- Does not spin properly when you hold down the lever
- Ideal only for cleaning small caliber weapons such as pistols.
Hoppe’s No.9 Gun Cleaning Aluminum Rod
Hoppe’s No.9 Gun Cleaning Aluminum Rod is a universal rod you can use for cleaning all types of shotguns. It has a ball bearing swivel handle that not only makes it easy to use but also comes with ergonomic advantages that make it comfortable to use for long. The 3-piece set has slotted ends which facilitates easy attachment of other tip end accessories.
- Universal cleaning rod for shotguns
- Has a ball bearing swivel handle
- Has slotted ends
- Designed for cleaning shotguns only
- The slotted ends do not universally support all tip end attachments
Hoppe’s Elite 1 – Piece Cleaning Rod Carbon Fiber
The new one-piece Elite Carbon Fiber Cleaning Rod is available in 8” and 36” lengths, thus giving you more options as far as choosing carbon fiber cleaning rods is concerned. With the carbon construction, they are designed to remain straight, irrespective of the cleaning force or pressure you may apply. It also comes with a soft and easy-grip handle, fitted with ball bearings to make the cleaning process a breeze.
- Made of carbon fiber
- Has an ergonomic handle
- Fitted with premium double ball bearing
- No complaints from buyers so far!
Allen 30” Brass Rifle Cleaning Rod
The Allen 30” Brass Rifle Cleaning Rod is a heavy duty cleaning rod and will be a worthy inclusion to your gun cleaning kit. It is made of solid brass and with a length of 30”, as well as 8 -32 threads, it will suit most of your cleaning needs especially in applications that demand the use of rifle and pistol brushes. It is such a versatility that sets it apart from the majority of the gun cleaning rods you will find in the market today.
- It is a heavy duty cleaning kit
- Has 8 – 32 threads
- Ideal for pistols and rifles
- Doesn’t tip end attachment for accessories.
- It is not universal
Tipton Deluxe 1 – Piece Cleaning Rod
This Tipton Deluxe 1 – Piece Cleaning Rod is made of carbon fiber, and it is one of the best gun cleaning rods not just by Tipton, but in the entire market. It has two high quality bearings which will not bind under pressure. It is designed to give you the best performance when working tight patches and you will also love the comfortable ergonomic designs. Also worth noting is the fact that the rods can bend to extreme degrees without the loss of normal straightness.
- Ideal for working tight patches
- Has quality ball bearings
- Has hanging holes for ease of storage
- Won’t fit a .22 Cal pistol bore.
Otis Technology Memory – Flex Small Caliber Cleaning Cable
Otis Technology Memory small caliber gun cleaning rod is available in a variety of lengths and compatible with various cleaning accessories from by Otis. The cables are coated and can withstand up to 750lb pull strength, thus giving you a lot of room as far as the amount of energy you would like to use in the cleaning is concerned. The cable also features solid brass slotted tips, cotton cleaning patches, and a bore-brush, hence, availing to you everything you need to properly clean your firearm.
- Available in varying lengths
- Coated for longevity
- Can withstand up to 750lb pull force
- Only compatible with Otis accessories. Won’t work with the standard jags and mops.
Gun Cleaning Rods Buyer Guide
There are various factors that go into consideration if you want to get a rod that will give you satisfactory results and cleaning experience. The last thing you want is a rod that will bend or break, or even cause you bruises when taking care of your gun. To help you get the most out of your shopping for these essential rods, here are some of the things you should look at as a buyer:
The material of the cleaning rod
The material used in making the cleaning rod is perhaps one of the most important considerations when considering cleaning rods. Most of the cleaning rods in the market today are made from either of the following materials-: steel cable, carbon fiber, steel, and aluminum. For a start, you should consider only the rods made from these materials. You should also realize that each of these materials has their merits and demerits you ought to understand before you make your final choice.
The rigidity of the rod
The rigidity of a rifle cleaning rod is another vital consideration you must never forget about because it has a direct impact on the quality of cleaning. The rigidity mainly depends on the material. It is the ability of the rod to flex during use. If you have a gun with small bores, you should go for smaller and less rigid rods.
With the small barrel diameters, the rods will not flex too much – an action that may increase their likelihood to break. If you have a gun with large bores such as shotguns and handguns, then your best bet is to go for a shotgun cleaning rod that is more rigid, since they will have the structural integrity to support the kind of force you will need to thoroughly clean such guns.
If you primarily clean handguns and rifles, then an ideal rod should be solid and they should be fitted with ball bearings. To get good results cleaning such guns, there needs to be a good engagement between the brushes and the patches, and in the absence of ball bearings, the cleaning actions may not be as good as you may have wanted. The bearing will make them rotate inside the barrel. If the rod has a fixed handle, you will be compelled to adjust your grip so that you can create a rotating motion when using the rod.
The number of pieces
The final consideration you should make when buying any pistol cleaning rod, or any other gun cleaning rod for that matter is the number of pieces. Single cleaning rods are the gold standard, but a single piece will have only one fixed length.
If you have a single shotgun or just one rifle to clean, then this is not going to be a problem. However, for greater peace of mind and versatility in cleaning when you need to take care of different types of guns with varying barrel lengths, a multi-piece rod will be the best choice for you.
Buying the best gun cleaning rods will go a long way in helping you clean your gun properly and ensure that your gun is in top condition at all times. With so many cleaning rods available in the market today, it can be overwhelming to know exactly which rods to buy, given that the standard rods that come with the gun cleaning kits are hardly enough. With the correct knowledge of your gun, and using the buyer guide given above, take some time to go through the reviews of the cleaning rods so that the ultimate decision you make will meet all your gun cleaning needs.